While the FPC connector on the Raspberry Pi 5 makes it possible to add hardware like PCIe NVMe adapters, a whole bunch of USB ...

Epilogue's SN Operator, a USB dock that accepts Super Nintendo carts. It comes with an emulator app (though you can use all ...

Practical steps to make an aging operating system usable into 2026 Part 1 You can switch to running mostly FOSS without ...

Nvidia has updated its Linux driver lineup with the introduction of branch 590, and this release formally discontinues support for older Maxwell-, Pascal-, and Volta-based GPUs. As a result, a wide ...

Running Linux from a USB drive is possible. You can boot just about any distribution you want from USB. There are some things you should consider before going this route. I've used Linux in just about ...

Chances are high that most of us deal with USB cables at least once a day. Whether that's because you're plugging in your phone to charge, or connecting a device to your PC, USBs are a common part of ...

The FTDI FT260 chip implements USB to I2C/UART bridges through two USB HID class interfaces. The first is for I2C and the second for UART. Each interface is independent, and the kernel detects it as a ...

The primary method here is to visit the FTDI website and search & download the drivers you’re looking for. Here’s how that can be done: Open your web browser and visit the FTDI driver download center ...

I’m running Home Assistant OS on an Acemagic T9 Pro MiniPC, which has onboard LEDs controlled via the motherboard’s built-in CH341 USB-serial interface. Previously, I had a Python script set up to ...

USB-to-serial debug boards are commonly used for board bring-up, checking for issues when a board does not boot, or accessing the serial console in systems without networking or video output. You’d ...

The distro in question is Proxmox though that likely isn’t a factor. It’s straightforward to start the systemd unit that fires up console on /dev/ttyUSB0 and connect to it, log in, etc…. But I don’t ...