The table shows the pin configuration of the Arduino UNO–based robotic arm. The red (VCC) wires of all servos are connected ...

Robots are cool. Robots you build yourself are cooler, especially ones that use stuff you have lying around already. Snoopy is a new open-source robot that uses an Arduino as a brain but with a 3D ...

While it is hard to tell with a photo, this robot looks more like a model of an old- fashioned clock than anything resembling a Nixie tube. It’s the kind of project that could have been created by ...

If you are interested in building your own snake robot perhaps with six legs or more, you might to take inspiration from the latest creation by YouTuber and robot designer James Bruton. Using a little ...

This is an archived article and the information in the article may be outdated. Please look at the time stamp on the story to see when it was last updated. (WGHP) — If you wanted a robot to do mundane ...

It's 7x the size of the regular board Arduino boards power everything from robots to RGB lights, but they're a little on the small side. YouTuber UncleStem has his own solution: build a gigantic, yet ...

While there are many potential uses for soft-bodied robots, the things are still typically only built in small experimental batches. Scottish scientists are out to change that, with a ...

This a robot can walk, without electronics, and only with the addition of a cartridge of compressed gas, right off the 3D-printer. It can also be printed in one go, from one material. Imagine a robot ...

FLUID, an open-source, 3D-printed robot, offers an affordable and customizable solution for automated material synthesis, making advanced research accessible to more scientists. FLUID, an open-source, ...